Aluminum Ceiling Installation Method The installation of aluminum ceiling is a systematic process that involves multiple steps and details.

Here is installation method for aluminum ceiling: Install the aluminum trim angle at the same horizontal height. Suspend the hangers and light steel keels at the appropriate spacing, with hanger spacing being less than or equal to 1.2 meters, and the light steel keel spacing being 1.2 meters. Connect the hanging parts-assembled on the triangular keel with the light steel keel in a vertical direction according to the spacing of the boards, and then adjust the level.

Press the sides of the square board parallel into the triangular keel seam, first install the two ends of the vertical direction, find the right angle, and then gradually press the one by one, and adjust once after each row is pressed to ensure that the board surface is flat and the board seam is vertical (note that the direction of the pit on the square board is inserted into the triangular keel seam).

Wear gloves when pressing the boards, and if you accidentally leave fingerprints on the board surface, them with clean water. It is forbidden to tear off the protective film during installation.

The purchased aluminum ceiling and the corresponding keels and accessories should meet the quality requirements the product, and there should be no bending deformation.

During transportation and stacking, the aluminum ceiling should be placed flat, should not be under pressure, and should avoid temperatures and the erosion of harmful substances.

The keel should be installed flat, and the spacing deviation should be controlled within the allowable range of 1.5 meters. When installing the aluminum ceiling, if there is a deviation in size, it should be adjusted first and then inserted in order, and it is not allowed to be forced prevent deformation.

 Large lamps, exhaust fans, etc. should be fixed with separate keels, and should not be directly placed on the aluminum ceiling. The above is installation method for aluminum ceiling. It should be noted that during the installation process, it is necessary to strictly follow the operating procedures to ensure the installation quality.